Translate
Violation Detail
Standard Cited: 19100213 C01 Woodworking machinery requirements.
Inspection Nr: 1405217.015
Citation: 01001C
Citation Type: Serious
Abatement Date: 07/18/2019 2
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 07/12/2019
Nr Instances: 2
Nr Exposed: 2
Related Event Code (REC):
Gravity: 10
Report ID: 0317500
Contest Date:
Final Order: 07/31/2019
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 07/31/2019 | $0.00 | 07/18/2019 | Serious | |
| Penalty | Z: Issued | 07/12/2019 | $0.00 | 07/18/2019 | Serious |
Text For Citation: 01 Item/Group: 001C Hazard:
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: (a) Facility, 310 Unity Street, Latrobe, PA: On or about June 3, 2019 there was no guard installed on the unlabeled 14 inch table saw that was being used to cut wood for patterns. The blade was set at approximately 2 inches above the table and no guard was in place to prevent contact during operation. (b) Facility, 310 Unity Street, Latrobe, PA: On or about June 3, 2019 there was no guard installed on the Delta 40 table saw used to cut wood for patterns. The blade was set at approximately 2 inches above the table and no guard was in place to prevent contact during operation.