Translate
Violation Detail
Standard Cited: 19100213 H01 Woodworking machinery requirements.
Inspection Nr: 1387011.015
Citation: 01003
Citation Type: Serious
Abatement Date: 10/08/2019 2
Initial Penalty: $7,293.00
Current Penalty: $6,000.00
Issuance Date: 09/16/2019
Nr Instances: 1
Nr Exposed: 3
Related Event Code (REC):
Gravity: 5
Report ID: 0213900
Contest Date: 10/07/2019
Final Order: 05/10/2021
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | J: ALJ Decision | 05/10/2021 | $6,000.00 | 10/08/2019 | Serious | |
| Penalty | C: Contested | 10/11/2019 | $7,293.00 | 10/08/2019 | Serious | |
| Penalty | Z: Issued | 09/16/2019 | $7,293.00 | 10/08/2019 | Serious |
Text For Citation: 01 Item/Group: 003 Hazard:
29 CFR 1910.213(h)(1): The sides of the lower exposed portion of the blade of radial saw(s) were not guarded to the full diameter of the blade by a device that automatically adjusted itself to the thickness of the stock and remained in contact with the stock being cut to give maximum protection possible for the operation being performed: a) Amerinox located at 2201 Mount Ephraim Ave, Camden NJ, Building 2, Skid Building Area: The Rockwell radial arm saw was not provided with a guard over the lower portion of the blade, on or about 3/21/2019. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM, FAILURE TO DO SO WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 AS PER 29 CFR 1903.19.