Translate
Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1381123.015
Citation: 01002
Citation Type: Serious
Abatement Date: 07/03/2019 2
Initial Penalty: $10,419.00
Current Penalty: $6,251.40
Issuance Date: 05/16/2019
Nr Instances: 7
Nr Exposed: 6
Related Event Code (REC):
Gravity: 5
Report ID: 0112000
Contest Date:
Final Order: 06/04/2019
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 06/04/2019 | $6,251.40 | 07/03/2019 | Serious | |
| Penalty | Z: Issued | 05/16/2019 | $10,419.00 | 07/03/2019 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard:
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by rotating parts: A. Fabrication Department: On, or about, March 7, 2019, a guard was not provided for the lower blade pulley on the Marvel band saw. B. Die Cell: On, or about, March 7, 2019, the rotating chip conveyor provided on the Kuraki KBT 13 milling center was not provided with safeguarding. It was located in the walking surface of the work platform and was operated with a standard on/off switch. C. Die Cell: On, or about, March 7, 2019, the Mazak Integrex 70 turning center was not provided with safeguarding such as an interlocked access door. D. Die Cell: On, or about, March 7, 2019, the Mazak Integrex 70YB turning center was not provided with safeguarding such as an interlocked access door. E. Die Cell: On, or about, March 7, 2019, safeguarding was not provided on the Okuma horizontal lathe lead screw. F. Die Cell: On, or about, March 7, 2019, safeguarding was not provided on lead screw on the large Okuma horizontal lathe, serial number 50140765. G. Screw Department: On, or about, March 7, 2019, safeguarding was not provided on the lead screw of the large Poreba horizontal lathe.