Violation Detail
Standard Cited: 19100219 E03 I Mechanical power-transmission apparatus.
Inspection Nr: 1375672.015
Citation: 01009C
Citation Type: Serious
Abatement Date: 07/25/2019 2
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 06/07/2019
Nr Instances: 5
Nr Exposed: 12
Related Event Code (REC):
Gravity: 5
Report ID: 0112000
Contest Date:
Final Order: 07/09/2019
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | I: Informal Settlement | 07/09/2019 | $0.00 | 07/25/2019 | Serious | |
Penalty | Z: Issued | 06/07/2019 | $0.00 | 07/25/2019 | Serious |
Text For Citation: 01 Item/Group: 009C Hazard:
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o)(a): A. Building 3, Line 23: On, or about, February 13, 2019, the guards were not provided to cover the in-running nip points for the drive belts on the two take-up drive units. B. Building 6, Line 19: On, or about, April 16, 2019, a guard was not provided on the end on the green take-up unit to cover the belt and pulley drive unit. C. Building 6, Line SA3: On, or about, April 16, 2019, guards were not provided for the belt drives on the capstan. D. Building 6, Line SA3: On, or about, April 16, 2019, the guard provided on the capstan allowed access to the in-running nip points created by the belt and pulleys. E. Building 6, Line 20: On, or about, April 16, 2019, a guard section was not provided on the back side of the take-up unit, allowing access to the drive belt.