Text For Citation: 01 Item/Group: 005 Hazard:

29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident: Employees were exposed to fire and electrical shock hazards. Employees engaged in housekeeping and grain handling activities in the feed mill and elevator were exposed to fire and electrical shock hazards in that the disconnecting means, branch circuits, and circuit breaker boxes at the following locations were not properly labeled to indicate their intended use for the equipment listed below: a) Feed Mill - Top Floor - Electrical Room - The 10Amp ON/OFF safety switch box not labeled. b) Feed Mill - Top Floor - Electrical Room - The fuse/circuit breaker box slots #1, 3, 6, and #9 not labeled. c) Feed Mill - Top Floor - East Electrical Room - The fuse/circuit breaker box #375 slots #7, and #10 not label. d) Feed Mill - Top Floor - East Electrical Room - The fuse/circuit breaker box #376 slots #7, 8, 11, 13, 29, 30, 33, 35, and #37 not labeled. e) Feed Mill - Top Floor - West Electrical Room - The Disconnect 480V ON/OFF safety switch box #388 not labeled. f) Elevator - Gallery area - The Disconnect 120/240V Disconnect switch box #409 not labeled. g) Elevator - Top Floor - The West Leg Service Disconnect Square D box not labeled. h) Elevator - Outside Roof area - The ON/OFF safety switch boxes not labeled. 29 CFR 1903.19(c)(1) requires certification that the abatement of the above violation is complete.