Translate
Violation Detail
Standard Cited: 19100332 B01 Training
Inspection Nr: 1345178.015
Citation: 01007A
Citation Type: Serious
Abatement Date: 03/04/2019 2
Initial Penalty: $4,831.00
Current Penalty: $3,500.00
Issuance Date: 01/28/2019
Nr Instances: 1
Nr Exposed: 1
Related Event Code (REC):
Gravity: 1
Report ID: 0830500
Contest Date:
Final Order: 03/05/2019
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 03/05/2019 | $3,500.00 | 03/04/2019 | Serious | |
| Penalty | Z: Issued | 01/28/2019 | $4,831.00 | 03/04/2019 | Serious |
Text For Citation: 01 Item/Group: 007A Hazard:
29 CFR 1910.332(b)(1): Employees were not trained in and familiar with the safety-related work practices required by 1910.331 through 1910.335 that pertain to their respective job assignments: (a) Capco LLC, at 1328 Winters Avenue, Grand Junction, CO: On or about 8/21/18 and preceding, the employer did not ensure that employees were trained in and familiar with the safety-related work practices required by 1910.331 through 1910.335 that pertain to their respective job assignments. The employer used a Miyashi Unitek model LW-150A laser power supply to perform laser welding. The laser and chiller were powered by 220v electricity. The lamp for the laser, located in the chiller unit of the power supply, was replaced when it no longer functioned. The employee had only turned "off" the power at the work station. The employee had not received training related to electrical safety-related work practices to perform this task. This condition exposed the employee to an electrical hazard.