Violation Detail
Standard Cited:5A0001 OSH Act General Duty Paragraph
Violation Items | |||||
---|---|---|---|---|---|
Nr: 1337340.015 | Citation: 01001 | Issuance: 01/11/2019 | ReportingID: 0521100 | ||
Viol Type: | Serious | NrInstances: | 1 | Contest Date: | 02/06/2019 |
Abatement Date: | 07/09/2020 2 | Nr Exposed: | 5 | Final Order: | 06/08/2020 |
Initial Penalty: | $9,959.00 | REC: | A | Emphasis: | |
Current Penalty: | $7,967.00 | Gravity: | 10 | Haz Category: |
Penalty and Failure to Abate Event History | |||||||
---|---|---|---|---|---|---|---|
Type | Event | Date | Penalty | Abatement | Type | FTA Insp | |
Penalty | Z: Issued | 01/11/2019 | $9,959.00 | 02/04/2019 | Serious | ||
Penalty | : | 02/07/2019 | $9,959.00 | 02/04/2019 | Serious | ||
Penalty | F: Formal Settlement | 06/08/2020 | $7,967.00 | 07/09/2020 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to struck-by and/or crushing hazards: On or about August 9, 2018, an employee was working within six feet of the swing radius of the Somero SXP Laser Screed. Among other feasible and acceptable abatement methods are: (1) training employees to stay at least six feet from the laser screed while the laser screed is in operation; and (2) the installation and use of mirrors on the laser screed to allow the laser screed operator to observe the area behind and around the machine's counterweight.