Translate
Violation Detail
Standard Cited: 19100147 C06 II The control of hazardous energy (lockout/tagout).
Inspection Nr: 1331625.015
Citation: 02001
Citation Type: Other
Abatement Date: 05/15/2019 2
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 12/27/2018
Nr Instances: 1
Nr Exposed: 1
Related Event Code (REC):
Gravity:
Report ID: 0418100
Contest Date:
Final Order: 04/04/2019
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 04/04/2019 | $0.00 | 05/15/2019 | Other | |
| Penalty | Z: Issued | 12/27/2018 | $0.00 | 01/24/2019 | Other |
Text For Citation: 02 Item/Group: 001 Hazard:
29 CFR 1910.147(c)(6)(ii): The employer did not certify that periodic inspections of the energy control procedures had been performed: a) Shop - On or about 07/16/18 and at times prior thereto employees applied lockout/tagout during maintenance/repairs of equipment including (but not limited to) press brakes, shears, notchers, tube benders, robotic welders, and wire machinery. The employer did not certify that the inspections/audits of the specific lockout/tagout procedures had been completed and were up to date. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.