Text For Citation: 01 Item/Group: 002A Hazard:

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a)Hyland Machining at 222 South West 4th Street in Sioux Falls, SD 57042: On and about and at times prior to May 15, 2018, the employer did not ensure employees were protected from pinch-point and caught-in hazards in that the guard covering the bar stock spindle on the Goodway GLS-200 was not installed. This condition exposed employees to pinch-point and caught-in hazards. (b)Hyland Machining at 222 South West 4th Street in Sioux Falls, SD 57042: On and about and at times prior to May 15, 2018, the employer did not ensure employees were protected from pinch-point and caught-in hazards in that the stock side panel of the HWACHEON Hi-ECO31AA was not installed exposing, including but not limited to, components of the drive shaft, spindle and the bar stock being feed to the CNC. This condition exposed employees to pinch-point and caught-in hazards. (c)Hyland Machining at 222 South West 4th Street in Sioux Falls, SD 57042: On and about and at times prior to May 15, 2018, the employer did not ensure employees were protected from pinch-point and caught-in hazards in that the CNC Enhancement Autobar 400 bar stock feeder did not have the panel covering the motor and drive system components installed. This condition exposed employees to pinch-point and caught-in hazards. (d)Hyland Machining at 222 South West 4th Street in Sioux Falls, SD 57042: On and about and at times prior to May 15, 2018, the employer did not ensure employees were protected from struck-by and/or caught-in hazards while operating the Yama Seiki AV-1000 in that the employer did not ensure door interlocks were engaged. This condition exposed employees to struck-by and/or caught-in hazards. (e)Hyland Machining at 222 South West 4th Street in Sioux Falls, SD 57042: On and about and at times prior to May 15, 2018, the employer did not ensure employees were protected from struck-by and/or caught-in hazards while operating the Goodway GLS-200 in that the employer did not ensure door interlocks were engaged. This condition exposed employees to struck-by and/or caught-in hazards. (f)Hyland Machining at 222 South West 4th Street in Sioux Falls, SD 57042: On and about and at times prior to May 15, 2018, the employer did not ensure employees were protected from struck-by and/or caught-in hazards while operating the Goodway GLS-150 in that the employer did not ensure door interlocks were engaged. This condition exposed employees to struck-by and/or caught-in hazards. (g)Hyland Machining at 222 South West 4th Street in Sioux Falls, SD 57042: On and about and at times prior to May 15, 2018, the employer did not ensure employees were protected from struck-by and/or caught-in hazards while operating the Yama HWACHEON Hi0ECO31A in that the employer did not ensure door interlocks were engaged. This condition exposed employees to struck-by and/or caught-in hazards. (h)Hyland Machining at 222 South West 4th Street in Sioux Falls, SD 57042: On and about and at times prior to May 15, 2018, the employer did not ensure employees were protected from struck-by and/or caught-in hazards while operating the Yama Seiki GLS-2000L in that the employer did not ensure door interlocks were engaged. This condition exposed employees to struck-by and/or caught-in hazards. (i)Hyland Machining at 222 South West 4th Street in Sioux Falls, SD 57042: On and about and at times prior to May 15, 2018, the employer did not ensure employees were protected from struck-by and/or caught-in hazards while operating the Mori Seiki SL-20 in that the employer did not ensure door interlocks were engaged. This condition exposed employees to struck-by and/or caught-in hazards. (j)Hyland Machining at 222 South West 4th Street in Sioux Falls, SD 57042: On and about and at times prior to May 15, 2018, the employer did not ensure employees were protected from struck-by and/or caught-in hazards while operating the Fadal VMC-4020B in that the employer did not ensure door interlocks were engaged. This condition exposed employees to struck-by and/or caught-in hazards. (k)Hyland Machining at 222 South West 4th Street in Sioux Falls, SD 57042: On and about and at times prior to May 15, 2018, the employer did not ensure employees were protected from struck-by and/or caught-in hazards while operating the HWACHEON Sirius-2 in that the employer did not ensure door interlocks were engaged. This condition exposed employees to struck-by and/or caught-in hazards.