Violation Detail
Standard Cited: 19100028 B01 I Duty to have fall protection and falling object protection.
Inspection Nr: 1305885.015
Citation: 02001
Citation Type: Repeat
Abatement Date: 06/06/2018 2
Initial Penalty: $50,815.00
Current Penalty: $36,000.00
Issuance Date: 05/17/2018
Nr Instances: 2
Nr Exposed: 23
Related Event Code (REC): C
Gravity: 5
Report ID: 0111500
Contest Date:
Final Order: 06/14/2018
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | I: Informal Settlement | 06/14/2018 | $36,000.00 | 06/06/2018 | Repeat | |
Penalty | Z: Issued | 05/17/2018 | $50,815.00 | 06/06/2018 | Repeat |
Text For Citation: 02 Item/Group: 001 Hazard:
29 CFR 1910.28(b)(1)(i): The employer did not ensure that each employee on a walking-working surface with an unprotected side or edge that was 4 feet (1.2 m) or more above a lower level was protected from falling by one or more of the following: Guardrail systems, safety net systems, or personal fall arrest systems: Plant: The employer did not ensure through providing and/or installing appropriate fall protection devices and/or systems, or utilizing other safe means that the employees required to perform tasks, such as (but not limited to) set-ups, maintenance, and repairs from the top of equipment, such as (but not limited to) the Lyle 152 PV trim press were protected from the hazard of falling approximately 6 feet 3 inches to the concrete floor and/or onto the machine. Inline Plastics Corp was previously cited for a violation of this Occupational Safety and Health Standard, 29 CFR 1910.28(b)(1)(i) which was contained in OSHA Inspection Number 1219502, Citation Number 1, Item Number 1, and was affirmed as a final order on September 21, 2017, with respect to a workplace located at 100 Constitution Drive, McDonough, GA 30253.