Violation Detail
Standard Cited: 19100213 H01 Woodworking machinery requirements.
Inspection Nr: 1305884.015
Citation: 01010
Citation Type: Serious
Abatement Date: 11/16/2018 2
Initial Penalty: $8,315.00
Current Penalty: $5,155.00
Issuance Date: 09/27/2018
Nr Instances: 2
Nr Exposed: 3
Related Event Code (REC): C
Gravity: 5
Report ID: 0213900
Contest Date:
Final Order: 10/16/2018
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | I: Informal Settlement | 10/16/2018 | $5,155.00 | 11/16/2018 | Serious | |
Penalty | Z: Issued | 09/27/2018 | $8,315.00 | 10/24/2018 | Serious |
Text For Citation: 01 Item/Group: 010 Hazard:
29 CFR 1910.213(h)(1): The sides of the lower exposed portion of the blade of radial saw(s) were not guarded to the full diameter of the blade by a device that automatically adjusted itself to the thickness of the stock and remained in contact with the stock being cut to give maximum protection possible for the operation being performed: a) Southwest area of Fabrication Shop-Stair Fabrication: The guard on the side of the lower exposed portion of the blade on a DeWalt Radial Arm saw did not automatically adjust to the thickness of the stock being cut leaving employees exposed to the saw blade, on or about 4/3/18. b) Northwest corner of building-Mill area: The guard on the side of the lower exposed portion of the blade on a DeWalt Radial Arm saw did not automatically adjust to the thickness of the stock being cut leaving employees exposed to the saw blade, on or about 4/3/18. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.