Translate
Violation Detail
Standard Cited: 19100213 C01 Woodworking machinery requirements.
Inspection Nr: 1305884.015
Citation: 01009A
Citation Type: Serious
Abatement Date: 11/16/2018 2
Initial Penalty: $8,315.00
Current Penalty: $5,155.00
Issuance Date: 09/27/2018
Nr Instances: 2
Nr Exposed: 5
Related Event Code (REC): C
Gravity: 5
Report ID: 0213900
Contest Date:
Final Order: 10/16/2018
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 10/16/2018 | $5,155.00 | 11/16/2018 | Serious | |
| Penalty | Z: Issued | 09/27/2018 | $8,315.00 | 10/24/2018 | Serious |
Text For Citation: 01 Item/Group: 009A Hazard:
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: a) South area of Fabrication Shop-Stair Fabrication: An automatically adjusting hood guard was not used by employees when cutting material on a Powermatic table saw, on or about 4/3/18. b) Center of Fabrication Shop-Interior Door area: An automatically adjusting hood guard was not used by employees when cutting material on a Robland Z237 table saw, on or about 4/3/18. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.