Translate
Violation Detail
Standard Cited: 19100305 B01 I Wiring methods, components, and equipment for general use.
Inspection Nr: 1290126.015
Citation: 02002
Citation Type: Repeat
Abatement Date: 3
Initial Penalty: $406.00
Current Penalty: $406.00
Issuance Date: 05/29/2018
Nr Instances: 2
Nr Exposed: 4
Related Event Code (REC):
Gravity:
Report ID: 0418100
Contest Date:
Final Order: 06/14/2018
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 06/14/2018 | $406.00 | Repeat | ||
| Penalty | Z: Issued | 05/29/2018 | $406.00 | Repeat |
Text For Citation: 02 Item/Group: 002 Hazard:
29 CFR 1910.305(b)(1)(i): Openings through which conductors entered cutout boxes, cabinets, or fittings were not effectively closed: On or about 1/25/2018 at CV2 conveyor employees were exposed to electrical shock hazards where: a. the cord providing power to the 11V Pacemaker TT4 heat sealer, S/N 5617 was not protected from damage in that the bushing was separated from the control panel. b. the cords providing power to the 11V Pacemaker TT6 heat sealer, S/N 5561 was not protected from damage in that no bushings were installed where two of the flexible cords entered the control panel. Aspen Products, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.305(b)(1)(i), which was contained in OSHA inspection number 1206593, citation number 1, item number 4 and was affirmed as a final order on 4/25/2017, with respect to a workplace located at 4231 Clary Boulevard Kansas City, MO 64130.