Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1283050.015
Citation: 01004
Citation Type: Serious
Abatement Date: 04/06/2018 2
Initial Penalty: $5,691.00
Current Penalty: $2,880.50
Issuance Date: 03/02/2018
Nr Instances: 4
Nr Exposed: 2
Related Event Code (REC):
Gravity: 5
Report ID: 0728900
Contest Date:
Final Order: 03/22/2018
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | I: Informal Settlement | 03/22/2018 | $2,880.50 | 04/06/2018 | Serious | |
Penalty | Z: Issued | 03/02/2018 | $5,691.00 | 04/06/2018 | Serious |
Text For Citation: 01 Item/Group: 004 Hazard:
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: The employer is failing to protect employees from struck by, caught in, and amputation hazards while operating machinery. This was most recently observed at 900 Kelly Ryan Dr, Blair, Nebraska on or about December 13, 2017 when the following machine guarding violations were documented: a. JFMT 360 Lathe in the Service Center - No guarding around rotating chuck. b. JFMK 530 Lathe in the Service Center - No guarding around rotating chuck. c. Zubal Lathe in the Service Center - No guarding around rotating chuck. d. Voortman Machine - 19" gap between light curtain and machine.