Violation Detail
Standard Cited: 19100305 A02 X Wiring methods, components, and equipment for general use.
This violation item has been deleted.
Inspection Nr: 1278109.015
Citation: 01009A
Citation Type: Serious
Abatement Date: 06/01/2018
Initial Penalty: $6,097.00
Current Penalty: $0.00
Issuance Date: 05/07/2018
Nr Instances: 5
Nr Exposed: 20
Related Event Code (REC):
Gravity: 1
Report ID: 0729700
Contest Date:
Final Order: 05/31/2018
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | I: Informal Settlement | 05/31/2018 | $0.00 | 06/01/2018 | Serious | |
Penalty | Z: Issued | 05/07/2018 | $6,097.00 | 06/01/2018 | Serious |
Text For Citation: 01 Item/Group: 009A Hazard:
29 CFR 1910.305(a)(2)(x): Flexible cords and cables were not protected from accidental damage, as might be caused, for example, by sharp corners, projections, and doorways or other pinch points: The employer is failing to protect employees from electrical and fire hazards while employees are using flex cords in break room appliances. This was most recently documented at the jobsite located at 3801 S Oliver St. in Wichita Kansas. The employer did not ensure that flex cords were free from sharp corners and pinch points; cords were through circular holes in cabinets and metal cabinets with sharp edges, not limited to the following areas: a) Building 2-297F, Hammer house area, Dept. 3231. b) Building 2-297F, Fab Crib area, 322A Shop. c) Building 2-297F, E-1 d) Building 3-187S e) Building 1-198D A-2