Violation Detail
Standard Cited: 19100028 B01 I Duty to have fall protection and falling object protection.
Inspection Nr: 1278109.015
Citation: 01001
Citation Type: Serious
Abatement Date: 3
Initial Penalty: $12,934.00
Current Penalty: $12,934.00
Issuance Date: 05/07/2018
Nr Instances: 2
Nr Exposed: 10
Related Event Code (REC):
Gravity: 10
Report ID: 0729700
Contest Date:
Final Order: 05/31/2018
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | I: Informal Settlement | 05/31/2018 | $12,934.00 | Serious | ||
Penalty | Z: Issued | 05/07/2018 | $12,934.00 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.28(b)(1)(i): The employer did not ensure that each employee on a walking-working surface with an unprotected side or edge that was 4 feet (1.2 m) or more above a lower level was protected from falling by one or more of the following: Guardrail systems, safety net systems, or personal fall arrest systems: The employer is failing to protect employees from fall hazards while drilling and fastening material at unprotected sides and edges 4 feet or more above a lower level. This was most recently documented at the jobsite located at or near 3801 S Oliver St. in Wichita Kansas. The employer did not require the use of a fall protection system or other means to ensure that employees working more than 4 feet above a lower level were protected from falling at the following locations: a) Building 1-198D, at 747 wheel well assembly, approximately 10 feet to the concrete below. b) Building 4-118F South Hanger, approximately 7 feet 4 inches to the concrete below.