Translate
Violation Detail
Standard Cited: 19100028 B03 I Duty to have fall protection and falling object protection.
Inspection Nr: 1277847.015
Citation: 01001B
Citation Type: Serious
Abatement Date: 08/31/2018 2
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 05/09/2018
Nr Instances: 2
Nr Exposed: 6
Related Event Code (REC):
Gravity: 5
Report ID: 0213600
Contest Date: 05/24/2018
Final Order: 08/29/2018
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | J: ALJ Decision | 08/29/2018 | $0.00 | 08/31/2018 | Serious | |
| Penalty | C: Contested | 05/31/2018 | $0.00 | 06/11/2018 | Serious | |
| Penalty | Z: Issued | 05/09/2018 | $0.00 | 06/11/2018 | Serious |
Text For Citation: 01 Item/Group: 001B Hazard:
29 CFR 1910.28(b)(3)(i): The employer did not ensure each employee is protected from falling through any hole (including skylights) that is 4 feet (1.2 m) or more above a lower level by one or more of the following: covers, guardrail systems, travel restraint systems, or personal fall arrest systems, as required by sub-items A through D of this section. a) On or about 11/16/17 on the outdoor condenser mezzanine adjacent to Engine Room #2 ; employees were exposed to a fall hazard of approximately 15 feet while walking and or working on the walkway in proximity to corner of #3 condensers and the face of # 1 when there was an opening of approximately 10 inches wide by 5 feet in length. b) On or about 11/16/17 on the outdoor mezzanine adjacent to Engine Room #2 ; employees were exposed to a fall hazard of approximately 15 feet while walking and or working on the walkway west of condenser # 1 when there was an opening approximately 10 inches wide by five feet in length. ABATEMENT CERTIFICATION REQUIRED