Translate
Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1266458.015
Citation: 01001B
Citation Type: Serious
Abatement Date: 03/15/2018 2
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 01/26/2018
Nr Instances: 3
Nr Exposed: 10
Related Event Code (REC): C;R
Gravity: 5
Report ID: 0112000
Contest Date:
Final Order: 02/20/2018
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 02/20/2018 | $0.00 | 03/15/2018 | Serious | |
| Penalty | Z: Issued | 01/26/2018 | $0.00 | 03/15/2018 | Serious |
Text For Citation: 01 Item/Group: 001B Hazard:
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by pinch points, shear points, rotating parts and in-running nip points: In the following locations, adequate machine safeguarding was not provided on conveyors: A. Nickel Area, Nickel crusher in-feed conveyor: On, or about, September 26, 2017, a section of the guarding on the underside of the inclined conveyor had been removed in order to allow chips that fell back down the conveyor to be discharged into a dump hopper positioned under the opening. B. Nickel Area, Nickel Crusher, Jorgensen fines conveyor: On, or about, September 26, 2017, the cross braces on the Jorgensen fines conveyor created a pinch point with the conveyor belt. The conveyor was not provided with a guard. C. Solids, Fragmentizer in-feed conveyor: On, or about, September 22, 2017, access to the in-running nip point created by the head pulley and the conveyor belt was not prevented by a guard.