Translate
Violation Detail
Standard Cited: 19100219 D01 Mechanical power-transmission apparatus.
This violation item has been deleted.
Inspection Nr: 1251282.015
Citation: 01004
Citation Type: Serious
Abatement Date: 12/29/2017
Initial Penalty: $9,959.00
Current Penalty: $0.00
Issuance Date: 12/04/2017
Nr Instances: 2
Nr Exposed: 1
Related Event Code (REC):
Gravity: 5
Report ID: 0418100
Contest Date: 12/26/2017
Final Order: 12/03/2018
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 12/03/2018 | $0.00 | 12/29/2017 | Serious | |
| Penalty | C: Contested | 02/26/2018 | $9,959.00 | 12/29/2017 | Serious | |
| Penalty | Z: Issued | 12/04/2017 | $9,959.00 | 12/29/2017 | Serious |
Text For Citation: 01 Item/Group: 004 Hazard:
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): On or about August 1, 2017, employees were exposed to caught-in hazards at the conveyor drive system labeled D40568 when performing the following work: a. employees climbed a ladder to clear jams on the overhead conveyor b. employees climbed a ladder or used a lift to get to the disconnect in order to lock out the conveyor for maintenance In the alternative: 29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: On or about August 1, 2017, employees were exposed to caught-in hazards at the conveyor drive system labeled D40568 when performing the following work without locking out prior to climbing a ladder or using a lift to approach the conveyor drive system: a. employees climbed a ladder to clear jams on the overhead conveyor b. employees climbed a ladder or used a lift to get to the disconnect in order to lock out the conveyor for maintenance In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).