Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 1200974.015
Citation: 01002
Citation Type: Serious
Abatement Date: 02/07/2017 2
Initial Penalty: $8,873.00
Current Penalty: $5,000.00
Issuance Date: 01/26/2017
Nr Instances: 5
Nr Exposed: 6
Related Event Code (REC): C
Gravity: 10
Report ID: 0523400
Contest Date:
Final Order: 02/17/2017
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | I: Informal Settlement | 02/17/2017 | $5,000.00 | 02/07/2017 | Serious | |
Penalty | Z: Issued | 01/26/2017 | $8,873.00 | 02/07/2017 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard:
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): (a) Employees were exposed to cut/contusion hazards while working on and around the DeWalt Miter Saw (Model #3579 and Serial #80080005). The employer did not ensure the point of operation was properly guarded. (b) Employees were exposed to cut/contusion hazards while working on and around the DeWalt Miter Saw (Model #3558 and Serial #82280041). The employer did not ensure the point of operation was properly guarded. (c) Employees were exposed to cut/contusion hazards while working on and around the DeWalt Miter Saw (Model #3581 and Serial #1280007). The employer did not ensure the point of operation was properly guarded. (d) Employees were exposed to cut/contusion hazards while working on and around the two custom built miter saws. The employer did not ensure the point of operation was properly guarded.