Translate
Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1198518.015
Citation: 01005
Citation Type: Serious
Abatement Date: 08/20/2018 2
Initial Penalty: $8,149.00
Current Penalty: $6,111.75
Issuance Date: 06/09/2017
Nr Instances: 5
Nr Exposed: 12
Related Event Code (REC):
Gravity: 5
Report ID: 0524530
Contest Date: 07/03/2017
Final Order: 09/24/2018
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 09/24/2018 | $6,111.75 | 08/20/2018 | Serious | |
| Penalty | C: Contested | 07/03/2017 | $8,149.00 | 07/07/2017 | Serious | |
| Penalty | Z: Issued | 06/09/2017 | $8,149.00 | 07/07/2017 | Serious |
Text For Citation: 01 Item/Group: 005 Hazard:
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: The following equipment was not adequately guarded to protect operators and other employees: A. In warehouse 301, on the pouring platform, the conveyer belt was not guarded to protect employees from a 1/4 inch opening between the two conveyer belts. B. In warehouse 301, on the pouring platform, the conveyer belt was not guarded to protect employees from a 1/4 inch opening where the conveyer belt meet the turntable. C. In warehouse 301, on the pouring platform, the area under the turntable was not guarded to protect employees from the rotating system under table. D. In warehouse 301, in the paint opening area, the conveyer belt was not guarded to protect employees from a 1/4 inch opening where the conveyer belt meet the roller system. E. In warehouse 301, in the paint opening area, the conveyer belt was not guarded to protect employees from a 1 inch opening where the conveyer rollers were exposed.