Violation Detail
Standard Cited: 19100219 E03 I Mechanical power-transmission apparatus.
Inspection Nr: 1167019.015
Citation: 01009B
Citation Type: Serious
Abatement Date: 11/10/2016 2
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 10/26/2016
Nr Instances: 2
Nr Exposed: 3
Related Event Code (REC):
Gravity: 5
Report ID: 0728900
Contest Date:
Final Order: 11/10/2016
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | I: Informal Settlement | 11/10/2016 | $0.00 | 11/10/2016 | Serious | |
Penalty | Z: Issued | 10/26/2016 | $0.00 | 11/10/2016 | Serious |
Text For Citation: 01 Item/Group: 009B Hazard:
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o): The employer is failing to protect employees from caught between hazards associated with inadequately guarded belt and pulley assemblies. The most recent occurrence of this was found at the facility located at 501 Division Ave, York, NE 68467 where the employer has employees working in the basement near inadequately guarded belt and pulley assemblies on two separate augers to and from the boot pit. Instances include but are not limited to: i. The belt in the belt and pulley assembly for the auger below the dump pit to the leg. ii. The belt in the belt and pulley assembly for the auger below the roller mill to the mixer.