Translate
Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 1155291.015
Citation: 01005
Citation Type: Serious
Abatement Date: 09/08/2016 2
Initial Penalty: $2,138.00
Current Penalty: $1,497.00
Issuance Date: 08/26/2016
Nr Instances: 1
Nr Exposed: 8
Related Event Code (REC):
Gravity: 5
Report ID: 0418100
Contest Date:
Final Order: 09/14/2016
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 09/14/2016 | $1,497.00 | 09/08/2016 | Serious | |
| Penalty | Z: Issued | 08/26/2016 | $2,138.00 | 09/08/2016 | Serious |
Text For Citation: 01 Item/Group: 005 Hazard:
29 CFR 1910.212(a)(3)(ii): Point of operation guards were not designed and constructed as to prevent the operator from having any part of their body in the danger zone during the operating cycle: Sheet Metal Engineers, Inc. - In the production area, a fan blade screen did not provide point of operation guarding to prevent employees fingers from the danger zone. Also, on the back of the fan, which was located on the floor, a vertical belt and pulley, was not guarded, on or about 06/08/16. The employees are exposed to stuck-by/caught between hazards. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).