Text For Citation: 02 Item/Group: 003B Hazard:

29 CFR 1910.147(f)(3)(i): A procedure was not utilized to afford the employees a level of protection equivalent to that provided by the implementation of a personal lockout or tagout device when servicing and/or maintenance was performed by a crew, craft: On or about March 12, 2016, employees were exposed to machine hazards associated with pressurized hydraulic, pneumatic, electrical, and gravity as sources of energy. The employer failed to implement energy control application steps as the MOH 540 Tilt Mold Table was not shut down or turned off to perform the servicing work. As a result, the remaining applicable energy control elements, involving group lockout were not performed. General Aluminum Mfg Company was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.147(d)(4)(i), which was contained in OSHA inspection number 892433, citation number 01, item number 001B and was affirmed as a final order on August 16, 2013, with respect to a workplace located at 5159 S. Prospect Street, Ravenna, Ohio 44266. General Aluminum Mfg Company was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.147(d)(3), which was contained in OSHA inspection number 943017 citation number 02 item number 001A and was affirmed as a final order on May 17, 2015, with respect to a workplace located at 1370 Chamberlin Blvd, Conneaut, Oh, 44030. General Aluminum Mfg Company was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.147(d)(4)(i), which was contained in OSHA inspection number 943017 citation number 02 item number 002A and was affirmed as a final order on May 17, 2015, with respect to a workplace located at 1370 Chamberlin Blvd, Conneaut, Oh, 44030.