Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1086093.015
Citation: 02001
Citation Type: Willful
Abatement Date: 02/24/2016 2
Initial Penalty: $46,200.00
Current Penalty: $41,580.00
Issuance Date: 02/11/2016
Nr Instances: 10
Nr Exposed: 20
Related Event Code (REC): C
Gravity: 10
Report ID: 0215800
Contest Date:
Final Order: 03/07/2016
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | I: Informal Settlement | 03/07/2016 | $41,580.00 | 02/24/2016 | Willful | |
Penalty | Z: Issued | 02/11/2016 | $46,200.00 | 02/24/2016 | Willful |
Text For Citation: 02 Item/Group: 001 Hazard:
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) On or about 8/18/2015, Draw Machine Area: The Vaughn Dead Block draw machine was operated with its cover/ door open and interlock bypassed. Employees exposed to rotating parts. b) On or about 8/18/2015, Draw Machine Area: The Vaughn Bull Block draw machine was operated without guards in place. Employees exposed to rotating parts and nip points. c) On or about 8/18/2015, Draw Machine Area: The Three Die draw machine was operated without guards in place and interlocks bypassed. Employees exposed to rotating parts and nip points. d) On or about 8/18/2015, Draw Machine Area: The "take off" for the Three Die Machine was not secured to prevent movement. Employees exposed to being struck by moving parts. e) On or about 8/18/2015, Draw Machine Area : The UDM 22 draw machine was operated with its guard not in place, with inadequate guarding, and with its interlocked bypassed. Employees exposed to rotating parts and nip points. f) On or about 8/18/2015, Draw Machine Area: The "take off" for the UDM 22 draw machine was not secured to prevent movement. Employees exposed to being struck by moving parts. g) On or about 8/18/2015, Draw Machine Area: The Syncro draw machine was operated with no guards in place. Employees exposed to rotating parts and nip points. h) On or about 8/18/2015, Draw Machine Area: The McBee Bullblock draw machine was operated with its guard open, in the jog mode. Employees exposed to rotating parts and nip points. i) On or about 8/18/2015, Production Area: The C13 draw machine was operated without guards in place. Employees exposed to rotating parts and nip points. j) On or about 11/5/2015, Maintenance Shop: The Bolton Tools Bench Lathe was not provided with a chuck guard. Abatement Documentation is required for these items.