Violation Detail
Standard Cited: 19100147 C04 II The control of hazardous energy (lockout/tagout).
This violation item has been deleted.
Inspection Nr: 1061491.015
Citation: 01002
Citation Type: Serious
Abatement Date: 07/17/2015
Initial Penalty: $7,000.00
Current Penalty: $0.00
Issuance Date: 06/29/2015
Nr Instances: 1
Nr Exposed: 6
Related Event Code (REC):
Gravity: 10
Report ID: 0418100
Contest Date:
Final Order: 08/05/2015
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | I: Informal Settlement | 08/05/2015 | $0.00 | 07/17/2015 | Serious | |
Penalty | Z: Issued | 06/29/2015 | $7,000.00 | 07/17/2015 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard:
29 CFR 1910.147(c)(4)(ii): Procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, 29 CFR 1910.147(c)(4)(ii)(A), (c)(4)(ii)(B), (c)(4)(ii)(C) and (c)(4)(ii)(D): On or about 5/5/15 and 5/7/15 in the bending machines area at 6144 Highway 341 South in Fort Valley, GA: Employer failed to provide clear and specific written energy control procedures for authorized employees that were required to troubleshoot, adjust, set up, and perform service and/or maintenance on the bending machines without locking and or tagging out all energy sources. One employee was injured on 5/5/15 while trying to correct the malfunctioning bending machine.