Violation Detail
Standard Cited: 19260502 D16 III Fall protection systems criteria and practices.
Inspection Nr: 1043266.015
Citation: 01002
Citation Type: Other
Abatement Date: 3
Initial Penalty: $38,500.00
Current Penalty: $7,000.00
Issuance Date: 08/24/2015
Nr Instances: 1
Nr Exposed: 1
Related Event Code (REC):
Gravity:
Report ID: 0418800
Contest Date: 09/16/2015
Final Order: 06/29/2016
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | R: Review Commission | 06/29/2016 | $7,000.00 | Other | ||
Penalty | C: Contested | 12/04/2015 | $38,500.00 | Repeat | ||
Penalty | Z: Issued | 08/24/2015 | $38,500.00 | Repeat |
Text For Citation: 01 Item/Group: 002 Hazard:
29 CFR 1926.502(d)(16)(iii): Personal fall arrest systems, when stopping a fall, were not rigged such that an employee could not free fall more than 6 feet (1.8 m) nor contact any lower level: On or about February 26, 2015, at the above mentioned jobsite, an employee was exposed to a fall hazard of approximately 10.3 feet while applying mastic cement (bull) on the flashing and membrane in the open soffit (cubby hole) on a two-story residential home, which the employer had not rigged the fall protection to prevent a fall of greater than 6 feet nor contact with a lower level. The Latite Roofing and Sheet Metal, LLC was previously cited for a violation of this occupational safety and health standard 29 CFR 1926.502(d)(16)(iii) or its equivalent standard, which was contained in OSHA inspection number 315498154, citation number 1, item number 1 and was affirmed as a final order on 04/29/2011, with respect to a workplace located at 4754 Clark Road, Sarasota, FL 34231.