Violation Detail
Standard Cited: 19100147 C04 I The control of hazardous energy (lockout/tagout).
Inspection Nr: 1010941.015
Citation: 01006A
Citation Type: Serious
Abatement Date: 08/31/2015 2
Initial Penalty: $5,000.00
Current Penalty: $3,500.00
Issuance Date: 05/19/2015
Nr Instances: 4
Nr Exposed: 4
Related Event Code (REC):
Gravity: 5
Report ID: 0418100
Contest Date:
Final Order: 06/10/2015
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | I: Informal Settlement | 06/10/2015 | $3,500.00 | 08/31/2015 | Serious | |
Penalty | Z: Issued | 05/19/2015 | $5,000.00 | 06/15/2015 | Serious |
Text For Citation: 01 Item/Group: 006A Hazard:
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: On or about November 20, 2014, employees were exposed to electrical, burn, and struck-by hazards when lockout/tagout procedures were not utilized by employees performing service or maintenance activities: a. procedures had not been given to or been seen by the employees performing service and maintenance activities on the equipment or production lines b. automated stacking equipment on the Hymmen line was not locked out when an employee leaned over the stacking area in order to place a board on the equipment so that it can be used as a dunnage board for the bundle d. automated trolleys are not locked out prior to employees entering the trolley path in order to get to the automated stacking equipment on the Hymmen line In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).