Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Accident Report Detail

Accident: 673160 - Caught In Die

Accident: 673160 -- Report ID: 0751910 -- Event Date: 09/23/1985
InspectionOpen DateSICEstablishment Name
265986009/23/19853523Wiese Corporation
THE DAY OF THE ACCIDENT THEY WERE USING THE PUNCH PRESS FOR PUNCHING COLD METAL. THE PART THEY WERE PUNCHING WAS APPROXIMATELY 3/16" BY 1" X 7" LONG. THERE WAS NO POINT OF OPERATION GUARD FOR USE WHEN PUNCHING COLD METAL. A SUPERVISOR STATED WHAT THEY DO THIS OPERATION 2 DAYS TWICE A YEAR FOR A TOTAL OF 4 DAYS YEARLY. THE REST OF THE TIME THE PRESS WAS USED FOR HOT PRESS OPERATION.
Keywords: die, guard, point of operation, punch press
Employee # Inspection Age Sex Degree Nature Occupation
1 2659860 Hospitalized injury Amputation Laborers, except construction

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close