Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Accident Report Detail

Accident: 201799053 - Employee Punctured In Neck By Discharged Metal

Accident: 201799053 -- Report ID: 0950644 -- Event Date: 10/28/2004
InspectionOpen DateSICEstablishment Name
11978910511/02/20043511Carlton Forge Works
At approximately 5:55 a.m., on October 28, 2004, Employee #1, a blacksmith working at Canton Forge Works, located at 7743 E. Adams St., Paramount, CA, took a workpiece in the shape of a ring (Rene 41, 12 in. OD, 3.5 feet ID, 2.7 in.L) to the drop hammer (Chambersburg, BS0, 5000 Lbs., 1237-9) and proceeded with an edging procedure to get rid of a deformity. Using a pair of tongs, Employee #1 started turning the ring while the hammer driver commenced to strike it. The ring tilted as the hammer came down, and the pair of tongs rebounded, striking Employee #1 in the chest. A small piece of metal broke off of the ring and lodged in his neck. Employee #1 was transported to Long Beach Memorial Hospital, where he underwent surgery to remove the small piece of metal from his neck. He was hospitalized for two days.
Keywords: chest, furnace, iron worker, ring, drop hammer, iron, neck, tongs, foundry, puncture
Employee # Inspection Age Sex Degree Nature Occupation
1 119789105 Hospitalized injury Puncture Supervisors, production occupations

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close