Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Accident Report Detail

Accident: 200053585 - Employee Fractures Arm When Struck By Pan

Accident: 200053585 -- Report ID: 0728900 -- Event Date: 08/17/2009
InspectionOpen DateSICEstablishment Name
31146784908/18/20091771Upton Construction Inc.
At approximately 12:15 p.m. on August 17, 2009, Employee #1 helped laying a basement foundation. He was putting up the outside and inside walls to tie them together, prior to pouring the concrete. Employee #1 was working from a 9-ft by 3-ft by 4-ft basket and he was removing some form of aluminum plates, 3-ft by 9-lft aka pans. There were eight pans in the basket, each weighing approximately 90 lb. While Employee #1was pulling a pan out the basket, apparently it tipped over and struck him. Employee #1 fractured his arm and sustained bruises and scratches. The foreman called for an ambulance, which arrived at approximately 12:30 p.m. Employee #1 was taken by a life flight to Creighton Medical Center.
Keywords: fracture, installing, wall, pouring, construction, fall, struck by, arm, contusion, unstable load
End Use Proj Type Proj Cost Stories NonBldgHt Fatality
Single family or duplex dwelling New project or new addition $50,000 to $250,000 1 9
Employee # Inspection Age Sex Degree Nature Occupation Construction
1 311467849 Non Hospitalized injury Fracture Construction laborers FallDist:
Cause: Forming
FatCause: Struck by falling object/projectile

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.