Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Accident Report Detail

Accident: 170739510 - Employee'S Thumb Amputated In Pipe Perforating Machine

Accident: 170739510 -- Report ID: 0950645 -- Event Date: 02/02/1996
InspectionOpen DateSICEstablishment Name
12006207002/02/19967311Volt Services Group
On January 11, 1996, Employee #1 was operating a pipe perforating machine for Inyall Service Corporation. The perforating machine had twenty-one 2 3/4 in. diameter by 0.16 in. thick blades with 72 teeth. They operated at 450 to 500 rpm to perforate the 5 1/2 in. diameter by 42 to 45 ft long pipe. Employee #1 was using the machine to make cuts in the pipe and was marking the pipe to keep track of the cuts. With the saws rotating, he picked up the marker spot with his left hand while holding chalk in his right hand. He was preparing to mark the pipe when his left glove became caught by a moving blade. Employee #1's left hand was pulled in, amputating his thumb. He was transported to USC Medical Center, where his thumb was reattached.
Keywords: clothing, amputated, glove, work rules, caught by, thumb, lockout, saw, pipe, blade
Employee # Inspection Age Sex Degree Nature Occupation
1 120062070 Hospitalized injury Amputation Slicing and cutting machine operators

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close