Translate
Violation Detail
Standard Cited: 19100217 C03 III F Mechanical power presses.
Inspection Nr: 1096256.015
Citation: 04004B
Citation Type: Repeat
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 03/30/2016
Nr Instances: 15
Nr Exposed: 15
Abatement Date: 04/25/2016
Gravity: 10
Report ID: 0521700
Contest Date:
Final Order: 04/22/2016
Related Event Code (REC): C
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 04/22/2016 | $0.00 | 04/25/2016 | Repeat | |
| Penalty | Z: Issued | 03/30/2016 | $0.00 | 04/25/2016 | Repeat |
Text For Citation: 04 Item/Group: 004B Hazard:
29 CFR 1910.217(c)(3)(iii)(f): Guards shall be used to protect all areas of entry to the point of operation not protected by the presence sensing device. a) Press 5 -- On or about October 15, 2015, employees were required to work with Punch Press Number 5, a USI/Clearing, 75 ton part revolution press, in continuous mode. The press had a light curtain on the front and left side. The right side of the press was unguarded. The unguarded right side allowed the operator and other employees to reach into the point of operation. b) Press 21 -- On or about October 15, 2015, employees were required to work with Punch Press Number 21, a USI/Clearing, 150 ton part revolution press in continuous mode. The press had a light curtain on the front. The right side of the press was unguarded. The unguarded right side allowed the operators and other employees to reach into the point of operation. The D&D Manufacturing, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.217 (c)(3)(iii)(f), which was contained in OSHA inspection number 979337, citation number 1, item number 16 and was affirmed as a final order on 12/23/2014, with respect to a workplace located at 1330 Pullman Drive, El Paso, TX 79936.