Translate
Violation Detail
Standard Cited: 19100303 F02 General.
Inspection Nr: 1407005.015
Citation: 04002
Citation Type: Other
Abatement Date: 12/19/2019 2
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 10/31/2019
Nr Instances: 3
Nr Exposed: 5
Related Event Code (REC):
Gravity:
Report ID: 0112000
Contest Date: 11/27/2019
Final Order: 03/27/2020
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 03/27/2020 | $0.00 | 12/19/2019 | Other | |
| Penalty | F: Formal Settlement | 03/27/2020 | $0.00 | 12/19/2019 | Other | |
| Penalty | C: Contested | 12/05/2019 | $0.00 | 12/19/2019 | Other | |
| Penalty | Z: Issued | 10/31/2019 | $0.00 | 12/19/2019 | Other |
Text For Citation: 04 Item/Group: 002 Hazard:
29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident: Compressor Room: On, or about, June 18, 2019, the following were not labeled: A. The disconnect switch for the conveyor belt system. B. Siemens I-T-E panelboard, two three-pole circuit breakers. C. Siemens I-T-E Indoor Load center, approximately half of the circuit breakers.