Translate
Violation Detail
Standard Cited: 19100305 A02 IX Wiring methods, components, and equipment for general use.
Inspection Nr: 1206035.015
Citation: 03016
Citation Type: Repeat
Abatement Date: 08/11/2017 4
Initial Penalty: $49,797.00
Current Penalty: $0.00
Issuance Date: 07/20/2017
Nr Instances: 4
Nr Exposed: 3
Related Event Code (REC):
Gravity: 5
Report ID: 0213900
Contest Date: 08/04/2017
Final Order: 12/29/2021
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | J: ALJ Decision | 12/29/2021 | $0.00 | 08/11/2017 | Repeat | |
| Penalty | C: Contested | 08/07/2017 | $49,797.00 | 08/11/2017 | Repeat | |
| Penalty | Z: Issued | 07/20/2017 | $49,797.00 | 08/11/2017 | Repeat |
Text For Citation: 03 Item/Group: 016 Hazard:
29 CFR 1910.305(a)(2)(ix): All lamps for general illumination are not protected from accidental contact or breakage by a suitable fixture or lampholder with a guard. Brass shell, paper-lined sockets, or other metal-cased sockets may not be used unless the shell is grounded: Recent examples of the employer's violative conduct occurred on these occasions: a) 9000 River Rd, Delair, NJ, 08110- Building 11, Die Correction Mezzanine: Overhead fluorescent lights were not provided with a guard to protect them from accidental contact or breakage, observed on or about 1/24/2017. b) 9000 River Rd, Delair, NJ, 08110- Building 3, Sutton Press, Extrusion Section of Press: A metal clamp light was not provided with a guard to protect it from accidental contact or breakage, observed on or about 1/23/2017. c) 9000 River Rd, Delair, NJ, 08110- Building 3, Sutton Press, Hot Saw Area of Press: A metal clamp light was not provided with a guard to protect it from accidental contact or breakage, observed on or about 1/23/2017. d) 9000 River Rd, Delair, NJ, 08110- Building 11, Die Correction: A light attached to the Victor Milling machine, #2350 was not provided with a guard to protect it from accidental contact or breakage, observed on or about 1/24/2017. To abate this violation, the employer must ensure that the light fixture is protected from accidental contact or breakage by providing a guard or suitable fixture. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, AND PURSUANT TO 29 CFR 1903.19, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM, INCLUDING THE STEPS IT IS TAKING TO ENSURE COMPLIANCE WITH THE STANDARD TO PROTECT EMPLOYEES FROM THE EXPOSURE TO ELECTRICITY AND FLYING GLASS FRAGMENTS AND INCLUDE A PHOTO OF THE GUARDING PROVIDED. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19. ALUMINUM SHAPES LLC WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD, ITS EQUIVALENT, OR ESSENTIALLY SIMILAR STANDARD 29 CFR 1910.305(a)(2)(ix), WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 1059368, CITATION NUMBER 1, ITEM NUMBER 33 AND WAS AFFIRMED AS A FINAL ORDER ON 7/5/2016, WITH RESPECT TO A WORKPLACE LOCATED AT 9000 RIVER ROAD, DELAIR, NEW JERSEY, 08110.