Translate
Violation Detail
Standard Cited: 19100305 B01 I Wiring methods, components, and equipment for general use.
Inspection Nr: 1542164.015
Citation: 03006
Citation Type: Other
Abatement Date: 02/24/2022 2
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 01/06/2022
Nr Instances: 4
Nr Exposed: 10
Related Event Code (REC):
Gravity:
Report ID: 0112000
Contest Date:
Final Order: 02/11/2022
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 02/11/2022 | $0.00 | 02/24/2022 | Other | |
| Penalty | Z: Issued | 01/06/2022 | $0.00 | 02/24/2022 | Other |
Text For Citation: 03 Item/Group: 006 Hazard:
29 CFR 1910.305(b)(1)(i): Conductors entering cutout boxes, cabinets, or fittings were not protected from abrasions: A. Plastics Department, Drill press work station near Machine #311: On, or about, July 28, 2021, the power cord connection to the motor on the Rockwell drill press (right) had an unsecured fitting. The inner conductors were exposed to the edge of the motor junction box. B. Plastics Maintenance Area: On, or about, August 6, 2021, armored cable that connected wiring for the overhead light fixture to a box containing a snap switch was not provided with a proper connector, exposing the inner conductors to the sharp edge of the box. C. Plastic Molding, Tan HPM: On, or about, August 27, 2021, a fitting for the box for the sliding door was unsecured, exposing the inner conductors. D. Powder Metal Department: On, or about, September 29, 2021, an electrical box provided on the back of Press #89, a Dorst mechanical compacting press had an unsecured fitting. The inner conductors were exposed to the sharp edges of the box.