Text For Citation: 03 Item/Group: 006 Hazard:

29 CFR 1910.303(f)(2): Services, feeders, and branch circuits. Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, unless located and arranged so the purpose is evident. The employer does not ensure disconnecting means are correctly labeled as to their purpose. This violation was observed on or about March 1, 2016, on the north wall in fabrication receiving, the #14 breaker to the Roller machine was not labeled. Wenco Energy Corporation was previously cited for a violation of this Occupational Safety and Health standard or its equivalent standard 29 CFR 1910.303(f)(2), which was contained in OSHA inspection number 316238088, Citation number 2, Item number 7, and was affirmed as a final order on September 19, 2012 with a final abatement date of September 17, 2012, with respect to a workplace hazard at 11102-D E. 56th St., Tulsa, Oklahoma 74146. Pursuant to 29 C.F.R 1903.19, within ten (10) calendar days of the abatement date, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that all disconnecting means or overcurrent devices are clearly and correctly labeled.