Translate
Violation Detail
Standard Cited: 19100036 G02 Design and construction requirements for exit routes.
Inspection Nr: 954623.015
Citation: 03005A
Citation Type: Other
Abatement Status: Abatement Completed
Initial Penalty: $4,400.00
Current Penalty: $3,300.00
Issuance Date: 07/10/2014
Nr Instances: 2
Nr Exposed: 8
Abatement Date: 07/29/2014
Gravity:
Report ID: 0214200
Contest Date: 07/29/2014
Final Order: 07/23/2015
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 07/23/2015 | $3,300.00 | 07/29/2014 | Other | |
| Penalty | C: Contested | 07/30/2014 | $4,400.00 | 07/29/2014 | Serious | |
| Penalty | Z: Issued | 07/10/2014 | $4,400.00 | 07/29/2014 | Serious |
Text For Citation: 03 Item/Group: 005A Hazard:
29 CFR 1910.36(g)(2): Exit access(es) were not at least 28 inches (71.1 cm) wide at all points. a. Newark Liberty Int'l Airport, Hangar 54, Tool Check Out The metal racking system installed in the tool storage area reduced the exit route to approximately 24 inches. Violation observed on or about February 4, 2014 b. Newark Liberty Int'l Airport, GSE, Building 154, Exit to loading dock A metal cage installed near the exit door from the parts storage area to the loading docks reduced the emergency exit to approximately 24 inches. Violation observed on or about February 10, 2014