Translate
Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 1129555.015
Citation: 03004
Citation Type: Repeat
Abatement Status: Abatement Completed
Initial Penalty: $15,400.00
Current Penalty: $9,200.00
Issuance Date: 07/29/2016
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 08/08/2016
Gravity: 10
Report ID: 0627700
Contest Date:
Final Order: 08/30/2016
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 08/30/2016 | $9,200.00 | 08/08/2016 | Repeat | |
| Penalty | Z: Issued | 07/29/2016 | $15,400.00 | 08/08/2016 | Repeat |
Text For Citation: 03 Item/Group: 004 Hazard:
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): This violation was observed on or about March 1, 2016, the employer does not ensure adequate point of operation guarding is in place on the Chicago press brake exposing employees to caught-in hazards. Wenco Energy Corporation was previously cited for a violation of this Occupational Safety and Health standard or its equivalent standard 29 CFR 1910.212(a)(3)(ii), which was contained in OSHA inspection number 316238088, Citation number 2, Item number 6, and was affirmed as a final order on September 19, 2012 with a final abatement date of September 17, 2012, with respect to a workplace hazard at 11102-D E. 56th St., Tulsa, Oklahoma 74146. Pursuant to 29 C.F.R 1903.19, within ten (10) calendar days of the abatement date, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that point of operation of machinery is guarded and remains guarded.