Translate
Violation Detail
Standard Cited: 19100217 D06 III Mechanical power presses.
Inspection Nr: 1217740.015
Citation: 03003
Citation Type: Other
Abatement Date: 05/29/2018 2
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 03/31/2017
Nr Instances: 1
Nr Exposed: 1
Related Event Code (REC):
Gravity:
Report ID: 0729300
Contest Date: 04/14/2017
Final Order: 05/08/2018
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | J: ALJ Decision | 05/08/2018 | $0.00 | 05/29/2018 | Other | |
| Penalty | C: Contested | 04/24/2017 | $0.00 | 05/17/2017 | Other | |
| Penalty | Z: Issued | 03/31/2017 | $0.00 | 05/17/2017 | Other |
Text For Citation: 03 Item/Group: 003 Hazard:
29 CFR 1910.217(d)(6)(iii): Dies were not stamped to indicate die weight where handling equipment could become overloaded: At 3125 Boschertown Road, St. Charles, MO, specifically inside of the Fabrication Department, the die belonging to the Walsh Mechanical Punch Press, m/n 65-X, s/n 9506, was not stamped with the die weight. This information was not documented elsewhere for the die-setters.