Violation Detail
Standard Cited: 19100305 B02 I Wiring methods, components, and equipment for general use.
Inspection Nr: 1051410.015
Citation: 03003
Citation Type: Other
Abatement Status: Corrected During Inspection
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 09/24/2015
Nr Instances: 3
Nr Exposed: 4
Abatement Date:
Gravity:
Report ID: 0418400
Contest Date: 10/15/2015
Final Order: 08/08/2016
Related Event Code (REC):
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | C: Contested | 10/07/2016 | $0.00 | Other | ||
Penalty | F: Formal Settlement | 08/08/2016 | $0.00 | Other | ||
Penalty | Z: Issued | 09/24/2015 | $0.00 | Other |
Text For Citation: 03 Item/Group: 003 Hazard:
29 CFR 1910.305(b)(2)(i): Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose: On or about March 31, 2015: a) Coil Shear Department, Littell #2 - The junction box for the motor that turns the rollers at the end of Line 2 had exposed wiring, thus exposing employees to electrical hazards. b) Can Department, Automated Slitter - The junction box for the motor did not have a suitable cover to enclose the live wiring, thus exposing employees to electrical hazards. On or about April 1, 2015: c) Old Maintenance Shop Behind B-Line Assembly - Part of the front cover was missing from the 280-volts electrical junction box, exposing employees to electrical hazards.