Translate
Violation Detail
Standard Cited: 19100219 D01 Mechanical power-transmission apparatus.
Inspection Nr: 1695679.015
Citation: 03002A
Citation Type: Other
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 02/28/2024
Nr Instances: 2
Nr Exposed: 8
Abatement Date: 04/01/2025
Gravity:
Report ID: 0521100
Contest Date: 03/21/2024
Final Order: 12/26/2024
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 12/26/2024 | $0.00 | 04/01/2025 | Other | |
| Penalty | C: Contested | 03/22/2024 | $0.00 | 03/27/2024 | Other | |
| Penalty | Z: Issued | 02/28/2024 | $0.00 | 03/27/2024 | Other |
Text For Citation: 03 Item/Group: 002A Hazard:
29 CFR 1910.219(d)(1): Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes. At an establishment located at 5215 Mill Road in Laona, Wisconsin; (a) On or about September 12, 2023, in Plant B, on the outfeed conveyor for the Costa Wide Belt Sander, the Sew-Eurodrive motor had an unguarded belt and pulley assembly exposing employees to caught-in and amputation hazards created by the in-running nip points on the rubber belt and pulley. (b) On or about September 12, 2023, in Plant B, the Precision Products Company Up cut saw, Model: 14M, S/N: 141245 had an unguarded belt and pulley assembly exposing employees to caught-in and amputation hazards created by the in-running nip points on the rubber belt and pulley.