Translate
Violation Detail
Standard Cited: 19100265 C20 II Sawmills.
Inspection Nr: 961178.015
Citation: 03002
Citation Type: Repeat
Abatement Status: Abatement Completed
Initial Penalty: $2,640.00
Current Penalty: $1,320.00
Issuance Date: 09/03/2014
Nr Instances: 1
Nr Exposed: 12
Abatement Date: 09/15/2014
Gravity: 1
Report ID: 0316400
Contest Date:
Final Order: 09/25/2014
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 09/25/2014 | $1,320.00 | 09/15/2014 | Repeat | |
| Penalty | Z: Issued | 09/03/2014 | $2,640.00 | 09/15/2014 | Repeat |
Text For Citation: 03 Item/Group: 002 Hazard:
29 CFR 1910.265(c)(20)(ii): Machine(s) that created dust, shavings, chips, or slivers during a period of time equal to or greater than one-fourth of the working day were not equipped with collecting system(s): (a) Sawmill: The Edger and Chop saw were not equipped with an adequate collection system to remove combustible saw dust and shavings from the mill area. Saw dust, 3 1/2' to 5' deep, had accumulated in piles alongside, under, and in the mill, as observed on March 5, 2014. ABATEMENT CERTIFICATION IS REQUIRED FOR THIS ITEM Wayne Mulch & Lumber, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard Sawmills 1910.265(c)(20(ii), which was contained in OSHA inspection number 315223008, citation number 1, item number 7 and was affirmed as a final order on May 26, 2011, with respect to a workplace located at Wayne Lumber & Mulch, Inc. in Wayne, West Virginia.