Text For Citation: 03 Item/Group: 002 Hazard:

29 CFR 1926.102(a)(1): The employer does not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles. BB Frame LLC dba Frame Q LLC, as successor to Frame Q LLC, and Juan Quevedo does not ensure that employees use appropriate eye protection when exposed to eye injury hazards, including but not limited to when using tools such as a circular electric saw, a pneumatic nail gun, and a hammer. This violation was most recently observed at 700 Palisades Ave., Cliffside Park, NJ, at instance (a): Exterior Framing- where employees were not wearing any eye protection while engaged in framing activities using a circular electric saw, and pneumatic gun, on or about 12/5/19 and 12/6/19. To abate this violation the employer must ensure that its employees performing framing work are protected from eye injury and that no employee is allowed to be exposed to eye injuries without wearing proper eye protection. a) Second floor: An employee was using a nail gun to install window framing on a two story residential house without the use of eye protection, on or about 2/20/20 Frame Q LLLC was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.102(a)(1), which was contained in OSHA inspection number 1329463, citation number 2, item number 1 and was affirmed as a final order on 2/06/2019, with respect to a workplace located at 417 3rd Street, Palisades Park, NJ 07650. Frame Q LLLC was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.102(a)(1), which was contained in OSHA inspection number 1071019, citation number 2, item number 2 and was affirmed as a final order on 3/08/2018, with respect to a workplace located at Abbot Boulevard, Fort Lee, NJ 07024.