Translate
Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
Inspection Nr: 313782781
Citation: 03001
Citation Type: Repeat
Abatement Status: X
Initial Penalty: $10,000.00
Current Penalty:
Issuance Date: 11/04/2010
Nr Instances: 2
Nr Exposed: 6
Abatement Date: 11/15/2010
Gravity: 02
Report ID: 0524700
Contest Date: 11/30/2010
Final Order: 05/04/2011
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 05/04/2011 | 11/15/2010 | Repeat | ||
| Penalty | Z: Issued | 11/04/2010 | $10,000.00 | 11/15/2010 | Repeat |
Text For Citation: 03 Item/Group: 001 Hazard: CRUSHING
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer does not furnish employment and a place of employment which is free from recognized hazards that are causing or likely to cause death or serious physical harm to employees, in that, the jib cranes the employer uses to remove and place hubs are not marked as to their capacities, exposing employees to struck-by hazards if the cranes are overloaded. a.Republic Engineered Products, Inc. located in Lorain, Ohio: The employer fails to ensure cranes and hoists are marked as to their capacities. This practice exposes workers to crushing and struck-by hazards from falling loads while working adjacent to Cold Saw #1, located in the Conditioning Building. b.Republic Engineered Products, Inc. located in Lorain, Ohio: The employer fails to ensure cranes and hoists are marked as to their capacities. This practice exposes workers to crushing and struck-by hazards from falling loads while working adjacent to Cold Saw #2, located in the Conditioning Building. Among other methods, a feasible abatement method to correct this hazard is to comply with the requirements of ASME B30.11-1998 "Monorails and Underhung Cranes", Chapter 11-1 Construction and Installation, Section 11-1.1: Markings. Republic Engineered Products Inc. was previously cited for a same or similiar violation of the general duty clause of the Occupational Safety and Health Act, for cranes and hoists not marked as to their capacity, which was contained in OSHA inspection #309445112, Citation #1, Item #2 and was affirmed as a final order on June 12, 2008, with respect to a workplace located at 1807 E. 28th St., Lorain, Ohio. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation ( using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.