Powered by GoogleTranslate

Violation Detail

Standard Cited: 19100216 B01 III Mills and calenders in the rubber and plastics industries.

Inspection Nr: 1593763.015

Citation: 03001

Citation Type: Repeat

Abatement Status: Abatement Completed

Initial Penalty: $28,714.00

Current Penalty: $30,000.00

Issuance Date: 10/27/2022

Nr Instances: 3

Nr Exposed: 8

Abatement Date: 11/03/2022

Gravity: 10

Report ID: 0524700

Contest Date: 11/16/2022

Final Order: 12/13/2024

Related Event Code (REC):

Emphasis:


Penalty and Failure to Abate Event History
Type Latest Event Event Date Penalty Abatement Due Date Citation Type Failure to Abate Inspection
Penalty F: Formal Settlement 12/13/2024 $30,000.00 11/03/2022 Repeat  
Penalty C: Contested 11/16/2022 $28,714.00 11/03/2022 Repeat  
Penalty Z: Issued 10/27/2022 $28,714.00 11/03/2022 Repeat  

Text For Citation: 03 Item/Group: 001 Hazard:

29 CFR 1910.216(b)(1)(iii):Safety tripwire cable or wire center cord was not located within 2 inches of a vertical plane tangent to the front and rear rolls. The cables were more than 72 inches above the level on which the operator stands. a. NOX US, LLC - Fostoria, Ohio: The employer does not ensure that the tripwire cable, located on the inbound side of Mix Mill #1 in area C-1, is no more than 72 inches above the level where the operator stands located within 2 inches of a vertical plane tangent to the roll. This violation was most recently observed on May 4, 2022, when the tripwire cable was located behind the front of the roll and at a height of up to approximately 79 inches on one end of the mill roll, and approximately 75.5 inches above the level where the operator stands, exposing the operator to caught-in hazards. b. NOX US, LLC - Fostoria, Ohio: The employer does not ensure that the tripwire cable, located on the inbound/front side of Mix Mill #2 in area C-1, is no more than 72 inches above the level where the operator stands and located within 2 inches of a vertical plane tangent to the roll. This violation was most recently observed on May 4, 2022, when the tripwire cable was located past the front of the roll and at a height approximately 84 inches on one end of the mill roll and up to approximately 88.5 inches where the operator stands, exposing the operator to caught-in hazards. c. NOX US, LLC - Fostoria, Ohio: The employer does not ensure that the tripwire cable, located on the outbound/back side of Mix Mill #2 in area C-1, is no more than 72 inches above the level where the operator stands and located within 2 inches of a vertical plane tangent to the roll. This violation was most recently observed on May 4, 2022, when tripwire cable was located past the front of the roll and at a height of approximately 73.5 inches on one end of the mill roll and up to approximately 78.5 inches on the other end, exposing the operator to caught-in hazards. NOX US, LLC was previously cited for a Serious violation of this Occupational Safety and Health Standard 29 CFR 1910.216(b)(1)(iii), which was contained in OSHA inspection number 1244737, citation number 1, item number 2 and was affirmed as a final order on January 22, 2019, with respect to a workplace located at 931 South Springville Avenue, Fostoria, Ohio 44830.

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close