Translate
Violation Detail
Standard Cited: 19260404 B01 III C Wiring design and protection.
Inspection Nr: 1477990.015
Citation: 03001
Citation Type: Other
Abatement Status: Not Completed - Worksite Changed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 10/22/2020
Nr Instances: 1
Nr Exposed: 5
Abatement Date: 08/02/2021
Gravity:
Report ID: 0112000
Contest Date: 12/01/2020
Final Order: 07/21/2021
Related Event Code (REC): R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 07/21/2021 | $0.00 | 08/02/2021 | Other | |
| Penalty | C: Contested | 12/07/2020 | $0.00 | 12/10/2020 | Other | |
| Penalty | Z: Issued | 10/22/2020 | $0.00 | 12/10/2020 | Other |
Text For Citation: 03 Item/Group: 001 Hazard:
29 CFR 1926.404(b)(1)(iii)(C): The employer did not ensure that each cord set, attachment cap, plug and receptacle of cord sets, and any equipment connected by cord and plug, except cord sets and receptacles which are fixed and not exposed to damage, were visually inspected before each day's use for external defects, such as deformed or missing pins or insulation damage, and for indications of possible internal damage. 230 Castlewood Drive, Berlin, CT: on or about June 9, 2020, a cord that was energizing an air compressor in the back of the house was found plugged into a GFCI and missing a grounding pin.