Text For Citation: 03 Item/Group: 001 Hazard:

29 CFR 1910.147(c)(7)(i)(A): Each authorized employee did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control. This violation occurred on or about March 1, 2016, the employer does not provide training to perform necessary lockout/tagout operations to employees who perform servicing and maintenance operations such as, but not limited to changing tooling in the Okuma CNC lathes and changing the saw blade on the horizontal band saws exposing employees to caught-in and struck by hazards. Wenco Energy Corporation was previously cited for a violation of this Occupational Safety and Health standard or its equivalent standard 29 CFR 1910.147(c)(7)(i)(A), which was contained in OSHA inspection number 316238088, Citation number 1, Item number 3, and was affirmed as a final order on September 19, 2012 with a final abatement date of September 17, 2012, with respect to a workplace hazard at 11102-D E. 56th St., Tulsa, Oklahoma 74146. Pursuant to 29 C.F.R 1903.19, within ten (10) calendar days of the abatement date, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that employees who are performing servicing and maintenance operations are trained at the authorized level.