Translate
Violation Detail
Standard Cited: 19260451 C01 General requirements.
Inspection Nr: 1103515.015
Citation: 03001
Citation Type: Repeat
Abatement Status: Not Completed - Worksite Changed
Initial Penalty: $6,160.00
Current Penalty: $6,160.00
Issuance Date: 05/02/2016
Nr Instances: 1
Nr Exposed: 9
Abatement Date: 05/19/2016
Gravity: 10
Report ID: 0317000
Contest Date: 05/27/2016
Final Order: 03/01/2017
Related Event Code (REC): C
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | W: Empr Withdrew | 03/01/2017 | $6,160.00 | 05/19/2016 | Repeat | |
| Penalty | C: Contested | 08/08/2016 | $6,160.00 | 05/19/2016 | Repeat | |
| Penalty | Z: Issued | 05/02/2016 | $6,160.00 | 05/19/2016 | Repeat |
Text For Citation: 03 Item/Group: 001 Hazard:
29 CFR 1926.451(c)(1): Supported scaffolds with a height to base width (including outrigger supports, if used) ratio of more than four to one (4:1) were not restrained from tipping by guying, tying, bracing, or equivalent means, as set forth in subparagraphs (i) - (iii) of this paragraph. a) The employer does not restrain the fabricated frame scaffolding from tipping by guying, tying, bracing or equivalent means. This violation was most recently observed at 3018 West Thompson Street, Philadelphia, PA 19121 on November 3, 2015 where employees were performing stucco operations from a fabricated frame scaffold that was not restrained from tipping by installing guys, ties, and braces. The fabricated frame scaffold was approximately thirty-nine (39) feet in height and approximately five (5) feet in width thus the height to base ratio was greater than seven to one (7:1). To abate this ongoing violation, the employer must require the use of guying, tying, bracing, or equivalent means when the height to base ratio exceeds four to one (4:1) on supported scaffolds. BC STUCCO AND STONE WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD, ITS EQUIVALENT, OR ESSENTIALLY SIMILAR STANDARD, 29 CFR 1926.451(c)(1) WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 978105, CITATION NUMBER 1 ITEM NUMBER 1, ISSUED ON 11/17/2014. NOTE: FINAL ORDER DATE - 2/10/15.