Translate
Violation Detail
Standard Cited: 19260404 F06 Wiring design and protection.
Inspection Nr: 1059086.015
Citation: 03001
Citation Type: Repeat
Abatement Status: Abatement Completed
Initial Penalty: $2,640.00
Current Penalty: $2,640.00
Issuance Date: 10/15/2015
Nr Instances: 1
Nr Exposed: 2
Abatement Date: 10/25/2015
Gravity: 1
Report ID: 0215800
Contest Date:
Final Order: 11/09/2015
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | Z: Issued | 10/15/2015 | $2,640.00 | 10/25/2015 | Repeat |
Text For Citation: 03 Item/Group: 001 Hazard:
29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures is not permanent and continuous. This violation was most recently observed at: Weeping Willow Way, Lot TS-10, Camillus, NY 13031, as described below: a) Entire work site, on or about 4-24-15: Employees were operating various portable hand tools through an extension cord that did not have a continuous path to ground due to a missing a ground pin. ABATEMENT DOCUMENTATION IS REQUIRED FOR THIS ITEM To abate this violation, the employer must ensure that its extension cords are protected by a continuous path to ground. Pursuant to 29CFR 1903.19, the employer must submit documents describing the steps it is taking to ensure compliance, including a description of how these steps protect its employees through electrical grounding. 4 X 4 GENERAL CONTRACTORS WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OR A SIMILAR OCCUPATIONAL SAFETY AND HEALTH STANDARD, 1926.404(f)(6), WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 989466, CITATION NUMBER 1, ITEM NUMBER 2A, ISSUED ON 8-14-14, WITH RESPECT TO A WORKPLACE LOCATED AT 219 WEST GEORGE STREET, PHILADELPHIA, PA, 19123.